ninjette.org - View Single Post - New Kawasaki 4-cyl 250 in the works?!

caltony · June 26th, 2014, 10:16 AM

@subzero
Your right in principle but some of your weight calculations are a bit off. Weight of the 250 ninja motor was about the same as the weight of my 450 motors.
The weight of my front ninja wheel with tire was actually 3 lbs lighter than my spoked SM front wheel.

Your weights for mx to plated bike are really off. The weight difference between the GasGas mx and plated ENDURO is 18 lbs.

Tony

June 26th, 2014, 10:16 AM	#44
caltony ninjette.org member Name: tony Location: central Calif Join Date: Oct 2013 Motorcycle(s): [2] 2006 Ninja 250s, [3]DRZs, [3]GasGas450s, [1]KDX 225 2 stroke,[1]650HondaCX, [1]Honda CBR1000rr Posts: 40	@subzero Your right in principle but some of your weight calculations are a bit off. Weight of the 250 ninja motor was about the same as the weight of my 450 motors. The weight of my front ninja wheel with tire was actually 3 lbs lighter than my spoked SM front wheel. Your weights for mx to plated bike are really off. The weight difference between the GasGas mx and plated ENDURO is 18 lbs. Tony