May 8th, 2022, 09:20 AM
|
#5
|
|
ninjette.org newbie
Name: Jeff
Location: Pullman, WA
Join Date: May 2022
Motorcycle(s): Too many! 20+, multiple Kawasakis, Hondas, Harleys, Buells, Yamaha, etc.
Posts: 6
|
Yes, that's what I'm looking for, but for the 88-07 Ninja 250. The newer riser blocks are made for the larger forks, and the bolt holes are slightly different.
Quote:
Originally Posted by Ghostt
Okay, are you looking for something like this?
https://www.buynowroaringtoyz.com/Ni...p/rtk725jb.htm
I wouldn't recommend you use these to lower the front of the bike, just use them to raise the handlebars.
With any of these style riser kits, be mindful of your control cables, and hoses.to make sure there is enough slack in them to still work properly, no binding, stressed, etc.... Kawasaki doesn't believe in waste. You may have to lower the front a little bit to get some slack in the lines. |
|
|
|