View Single Post
Old August 2nd, 2014, 11:23 AM   #128
Rassie
Motorcycle bon vivant...
 
Rassie's Avatar
 
Name: Rassie
Location: Cary, NC
Join Date: Jun 2011

Motorcycle(s): 300 Ninja, 250R Ninja, SV650S, CB350, GT750, Aprilia RS250, Triumph Street Triple R

Posts: 101
Engine mounts between Ninjette models.

OK so got around to take some measurements this morning. Seems that we are in luck. The width of the lower rear mounts is the same on my 08 250 and on my 13 300. Both are 120mm. The upper mounts are also the same at 100mm.

Now those front mounts are a different story since the 300 has some rubber mounts there that I did not see on the older models (would have to strip off the fairings to confirm). However since the rear mounts are the same it will be easy to modify the front mounts to suit.

The distance between the lower and upper mount was difficult to measure but seemed to be the same as well at 180 to 185mm or somewhere in between. As I mentioned it is difficult to measure that distance but eyeballing it gives me 180 to 185mm and they both seem to be the same.
__________________________________________________

NESBA 13, 300 Ninja, 250r Ninja, 06 SV650, Ninja ex250, CB350, CL90 ,GT750, Aprilia RS250, Triumph Street Triple R www.mybikeproject.com
Rassie is offline   Reply With Quote