ninjette.org - View Single Post

Rexbo · February 23rd, 2012, 09:58 AM

There is a washer that is supposed to be in there... also make sure that your sprocket is on correctly, its not symmetric so make sure thats correct as well.

ALSO both Nemesis and I had our front sprocket nuts unwind themselves and come off on the track (after torquing to 65 lb-ft!) so be sure to have some kind of physical lock, safety wire or silicone to ensure the nut doesn't come loose.

February 23rd, 2012, 09:58 AM	#10
Rexbo CVMA / AFM / M1GP #250 Name: Steve Location: Los Angeles Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.	There is a washer that is supposed to be in there... also make sure that your sprocket is on correctly, its not symmetric so make sure thats correct as well. ALSO both Nemesis and I had our front sprocket nuts unwind themselves and come off on the track (after torquing to 65 lb-ft!) so be sure to have some kind of physical lock, safety wire or silicone to ensure the nut doesn't come loose.