April 16th, 2014, 11:06 AM
|
#29
|
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013
Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes
Posts: A lot.
MOTM - Jun '18, Oct '16
|
Probably need a rebuild of the caliper or master cylinder. The bore in the caliper could be bad, or the piston seals may be old and hard.
You could remove the caliper and clean around the piston seals for starters. There may be a build-up of fluid and brake dust that's restricting the movement of the piston when cold.
|
|
|