December 24th, 2011, 01:22 PM
|
#214
|
ninjette.org guru
Name: Solon
Location: Toronto, Ontario
Join Date: Jun 2011
Motorcycle(s): 2011 Kawasaki Ninja 250R (sold), 2007 SV650s (deer wrecked), 2010 Suzuki SV650S
Posts: 334
|
It took me days to do mine. I'm not sure why, but I found it took me annoyingly long to do everything. Taking off the fairings for the first time took me a while, and so did hooking everything back up. I ran into a few speed bumps when certain things didn't fit, or bolts were too long or short so I had to go to the hardware store a few times to get everything I needed. I used simple L brackets with some bolts, washers and locking nuts. For the plate lights I spliced 2 LED bolts together and soldered them onto the original wiring with the stock harness.
Here are the results:
|
|
|