ninjette.org - View Single Post - possibly a cheap yet clean rear swingarm hugger

wayanlam · July 22nd, 2011, 06:32 PM

so i got the part yesterday from the Yami dealer, and it went quite well!

i started to make a couple custom brackets/mounts to connect the hugger to the swingarm on the chain side, and another under the brake caliper. will take some more pics later when i get home from work.

only one hole lines up, which is the one by the rear wheel sprocket. the others are all a little off. but easily remedied with some little strips of metal.

to be continued...

July 22nd, 2011, 06:32 PM	#20
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	so i got the part yesterday from the Yami dealer, and it went quite well! i started to make a couple custom brackets/mounts to connect the hugger to the swingarm on the chain side, and another under the brake caliper. will take some more pics later when i get home from work. only one hole lines up, which is the one by the rear wheel sprocket. the others are all a little off. but easily remedied with some little strips of metal. to be continued... __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield