ninjette.org - View Single Post

minizoom · January 2nd, 2009, 09:49 AM

Here's a picture of my garmin quest mounted. If you look at the clutch perch there is a rubber cap, you can take the cap off and mount a ram ball on it. You do however have to re-thread it. You need a 3/28-16 tap cuz it's metric. The credit goes to hickman71 from ninja250.org though.

January 2nd, 2009, 09:49 AM	#30
minizoom ninjette.org member Name: Alvin Location: Yorba Linda CA - SoCal Join Date: Dec 2008 Motorcycle(s): 09 ZX6R, previous bike owned 08 Ninja 250R Blue Posts: 133	Here's a picture of my garmin quest mounted. If you look at the clutch perch there is a rubber cap, you can take the cap off and mount a ram ball on it. You do however have to re-thread it. You need a 3/28-16 tap cuz it's metric. The credit goes to hickman71 from ninja250.org though.