ninjette.org - View Single Post - How-to remove shifter peg?

leed · October 15th, 2011, 08:10 AM

If I remember correctly, all you have to do is take out the huge button head screw holding it in. You will then have to remove the other half of the shift linkage by taking the cotter pin/screw all the way out, and sliding it off the splined shaft. You can take apart the linkage, but if you're shifting is fine, I'd take the whole thing off.

October 15th, 2011, 08:10 AM	#2
leed ninjette.org sage Name: David Location: Loves Park, IL Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969	If I remember correctly, all you have to do is take out the huge button head screw holding it in. You will then have to remove the other half of the shift linkage by taking the cotter pin/screw all the way out, and sliding it off the splined shaft. You can take apart the linkage, but if you're shifting is fine, I'd take the whole thing off.