August 22nd, 2018, 06:16 AM
|
#4
|
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013
Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes
Posts: A lot.
MOTM - Jun '18, Oct '16
|
As taz suggested, a small chisel would probably be your best bet at this point.
Stay out on the very edge, and dig into the screw with the chisel so you can get it to rotate.
If not, then start drilling.
|
|
|