Quote:
Originally Posted by Rstark
I can’t even get the main spring into the pre drilled hole on the brake lever due to the multiple bends in the spring. You can see what I’m talking about by looking at the thumbnail of the video you posted. So if some has pictures of this set up successfully installed, please post them!
|
Spring is inserted into brake-pedal separately before it's attached to rearset. If your brake-pedal is already bolted on, remove it to install spring. Go to 6:22 on video.
It's like some of those procedures in manual that starts with one simple step:
"remove engine"
Post pictures if what you have. Some may have return-spring in between master-cylinder and brake-pedal. Note flipped master-cylinder.
