View Single Post
Old October 2nd, 2011, 06:31 PM   #145
forbitel
ninjette.org member
 
Name: telecom
Location: Toledo, OH
Join Date: May 2011

Motorcycle(s): 2010 Ninja 250r

Posts: 43
Quote:
Originally Posted by Jack Frost View Post
I am new and signed up to ask this question, on cars the fuel injector sits on top and fires down, on this setup it looks as the injector sits on the bottom and fires up.

is this correct and is there any benefit to this?
Jack, When I discussed about this with Matt, ecotrons, he recommended to set the injectors up firing down as regularly done in other setups. However, this would require rotating the throttle body locating the accelerator cable on the other side, opposite side from our bike. I hear few recommendation about getting a longer cable, perhaps from a 650R so it was long enough to allow rotating the throttle body. I decided to leave them down firing up and try it and see if it was really needed to rotate, however it is been working great so I have seen not need to rotate it.

Regards,
Forbitel
forbitel is offline   Reply With Quote