|
Hey, sorry it's been a while, I've been busy with other things but I finally got to prodding around with the multi-meter. I also popped off the ignition switch back cover and the 100 ohm resistor is fine and the starter switch is functional.
Checked the resistance of ground wire coming off the battery. It's at 0 so it's good.
I'm getting 12.6 volts from the battery and 12.6 v from the main positive wire that runs from the battery to the starter solenoid switch. After that the power stops. It doesn't matter if the ignition switch is on or off. I've prodded all the wires coming out of the starter solenoid switch and the 30amp main fuse and nothing. That's why I replaced the switch with a new one because I couldn't understand why all the power is stopping at that point. There isn't even power going to the fan fuse. Nothing, she's completely dead
|