ninjette.org - View Single Post - IGNITION SWITCH BYPASS-To-3pSt

DannoXYZ · March 1st, 2021, 03:27 PM

full-stop here. Do not continue until you do four measurements outlined above. You may not believe in voltage-measurements, but they are critical to troubleshooting, pinpointing problem area, and finding solution. Each and every single step down to millimeter and millivolt matters:

1. battery-voltage = ??? volts
2. B-terminal voltage = ??? volts
3. fuse input = ??? volts
4. fuse output = ??? volts

This is literally 5-minute fix! How much time have you wasted since starting this project? Certainly more than 5-minutes.

Have you seen U.S. Army recipe for chocolate-chip cookies?

March 1st, 2021, 03:27 PM	#52
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	full-stop here. Do not continue until you do four measurements outlined above. You may not believe in voltage-measurements, but they are critical to troubleshooting, pinpointing problem area, and finding solution. Each and every single step down to millimeter and millivolt matters: 1. battery-voltage = ??? volts 2. B-terminal voltage = ??? volts 3. fuse input = ??? volts 4. fuse output = ??? volts This is literally 5-minute fix! How much time have you wasted since starting this project? Certainly more than 5-minutes. Have you seen U.S. Army recipe for chocolate-chip cookies? Last futzed with by DannoXYZ; March 1st, 2021 at 05:56 PM.