View Single Post
Old June 14th, 2011, 07:45 AM   #37
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
Quote:
Originally Posted by lilyanx217 View Post
how do i take the fork apart (inner cylinder i think)? i tried pulling it apart but its not working. I tried it with someone pulling the bottom part and I tried pulling the other part but I cant get them to seperate with a lot of force. Also... I tried loosening the allen bolt on the bottle of the fork, I had to use A LOT of force.. So much force that I had to use pliers on the allen wrench to loosen it... After I loosened it, i cant get the bolt to come out.. It just keeps turning/loosening but its not coming out.

Please help
Raymond, what I did to remove that bolt was to gently slide down the longest Craftsman pry bar I had. It was just long enough that I could push against the inside of the tube to keep everything from spinning. If you've gotten the retaining clips already removed and haven't pulled the bolt out yet, this should be your last step. I'm in Union City and if you still need help, you can bring it by some evening and I can help you.
__________________________________________________
The www.ModMy250.com guy
CThunder-blue is offline   Reply With Quote