ninjette.org - View Single Post - DIY- Removing the Kleen Air System Hoses and Plugging the Holes on a 08 250R

opc · May 6th, 2011, 07:30 PM

Hi kkim,

That's correct. I only disconnected the two bolts holding the old plate, and installed the new plate using the same bolts. I didn't remove anything below the plate.

I'll pull things back apart tomorrow morning and make sure none of the hoses have worked themselves loose. I was pretty meticulous, and everything was carefully reconnected, but who knows, maybe I missed something or kinked a tube.

Thanks for your help!

Cheers,
Owen

May 6th, 2011, 07:30 PM	#94
opc ninjette.org member Name: Owen Location: Canada Join Date: Mar 2011 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: 121	Hi kkim, That's correct. I only disconnected the two bolts holding the old plate, and installed the new plate using the same bolts. I didn't remove anything below the plate. I'll pull things back apart tomorrow morning and make sure none of the hoses have worked themselves loose. I was pretty meticulous, and everything was carefully reconnected, but who knows, maybe I missed something or kinked a tube. Thanks for your help! Cheers, Owen