|
Break through! We were messing with the vacuum lines and it seems that one of the lines is the culprit. We swapped the line going from the petcock to the carb to another carb hose to the petcock and tightened them up. (there was zip ties on them!) The bike is ridding MUCH better!
The sputtering is very minimal now but still somewhat there. We are going to replace all the vacuum lines and clamps and hope that will get the bike up to 100%!
Anybody know where I could get some new vacuum lines or clamps? Or even any information on the exact size of the line, etc. would help a lot.
I hope this thread will help anyone who is experiencing the same problem.
__________________________________________________
Be careful. Remember you are
invisible
|