[SMman]

Sorry "Old Guy". I'm just seeing this post now. I started my private licence back in 1992 so have been flying on and off for 20 years. I do fly the Cessna 337 as a birddog/patrol pilot with a forest fire suppression company. I also fly as a spray support pilot with the 337 and got some seat time and spray practice in the Cessna 188 last season. I will be flying a Piper Aerostar this season, along with the 337, 188. My first flying job was flying skydivers in wide body Cessna 182s. I enjoyed it a lot and still fill in when needed. The 300hp 3 blade is a fun machine.

Back to Givi:

Givi finally replied to my e-mail with this:
"Thank you for your interest in Givi Motorcycle accessories.
For all Canadian pricing, warranty, and availability please contact our
Canadian importer."

That was a long wait for no information but thankfully the Canadian importer replied in less than 24 hours with this:
"For the ``Easylock`` tank bags. There is no mounting kit listed for your models. Various reasons, but the kit 076-BF04 is a common kit used for ZX6R 09-11, ZX10R 10-12, Z1000 and Z1000SX (instructions attached). This may work if the diameter of the tank cap is the same as these models. Plus care must be taken to have enough room for clearance between the handle bars and tank bag used. The latter reason is usually why some models are not listed. The 3D TPH02 tank bag may fit, but a T480 may not. Thank you for your interest in Givi Products."

No definite answer but at least its something I guess. I am going to mount my Givi topcase in the spring and revisit the tankbag later in the summer. My local dealer in New Brunswick should be able to help and keep lots inventory in stock so might have something for me to try when the time comes.