ninjette.org - View Single Post

DannoXYZ · April 21st, 2019, 07:32 PM

Since we’re not building spaceships (yes, I’ve worked for NASA), any basic multimeter from Harbour Freight will do. Check this site for coupons: http://hfqpdb.com

Here’s video on how to use multimeter: https://www.youtube.com/watch?v=SLkPtmnglOI

7. Disconnect input and output wires from both coils and measure resistance:

- between 2 input terminals, should be 2.1-3.2 ohms
- between spark-plug wire output terminal and coil mounting-bolt, should be 10-16k ohms

April 21st, 2019, 07:32 PM	#4
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Since we’re not building spaceships (yes, I’ve worked for NASA), any basic multimeter from Harbour Freight will do. Check this site for coupons: http://hfqpdb.com Here’s video on how to use multimeter: https://www.youtube.com/watch?v=SLkPtmnglOI 7. Disconnect input and output wires from both coils and measure resistance: - between 2 input terminals, should be 2.1-3.2 ohms - between spark-plug wire output terminal and coil mounting-bolt, should be 10-16k ohms Last futzed with by DannoXYZ; April 21st, 2019 at 08:50 PM.