Quote:
Originally Posted by jkv45
It also sounds like the clutch plates are sticking. I had a Ninja that liked to do that as well. I would either rock it in gear before starting to break it loose or hold the front brake when I hit the button and it would break free.
What oil are you using? Did the issue start after the oil change?
As noted, check the adjustment of the clutch cable - https://faq.ninja250.org/wiki/Adjust...e_clutch_cable
You might want to check the condition of your battery also.
|
The battery is old but still charges up and stays at a good voltage after riding for a bit
It’s the same oil I had previously, 20w-50 full synthetic
It didn’t want to go into first gear when I first tried, I had to rock it a bit and then it finally went down