View Single Post
Old February 12th, 2021, 11:26 AM   #63
rstnick
ninjette.org member
 
rstnick's Avatar
 
Name: Rob
Location: GTA Southern Ontario
Join Date: Apr 2020

Motorcycle(s): 2011 250R, 2000 ZRX1100C4, 1978 KZ650C2

Posts: 87
Well I've disassembled the tail to have a better look at the right side signal wires that have pulled off the LED light.



No connectors were used to be able to disconnect the turn signals and license plate lights.
So to lower or remove the undertail completely, I will need to cut some wires.

The backside of the LED signal does have two connecting points inside the yellow circle, one visible in the picture above.
My soldering skills are not that great.
Joining two wires can sometimes be a chore.
Probably using the wrong soldering iron (Weller gun type) and solder.
Trying to re-solder the wire to the backside of the light is what I need some help with.

Some pointers?
Ideally I need to remove the undertail completely.
Will need to cut and fix wiring afterwards.

Or get a new light with wire attached.
It's a Hot Bodies product, but have not been able to find parts.
I think I will try emailing Hot Bodies.

Right signal foreground, left in further:



Left side signal still attached:



rstnick is offline   Reply With Quote