Quote:
Originally Posted by DannoXYZ
(SNIP)
Float-height shouldn't matter one bit when pilot-screws are all way in. ALL petrol flow should be stopped in that position. Fact that yours will start and run with screws all way in shows something's wrong internally.
|
As Danno said - something isn't assembled or adjusted correctly.
Either you are missing the "collar"/Needle Jet or the Jet Needles are not sitting in the slides correctly and are being held out of the Main Jet when they should not be. Not sure exactly how the Enrichener Circuit works, but that could be involved as well.
Fuel is being dumped in from somewhere else besides the Idle Circuit.
Any other ideas anyone?