ninjette.org - View Single Post - Front Brake : went limp (zero resistance)

arthury · July 12th, 2020, 08:06 PM

Since I was planning to replace the brake hose with the new Galfer Stainless ones, I thought this is a perfect time to do so.
Old hose was removed.
The Galfer one is in place, loosely bolted on both ends.
Master Cylinder is completely empty.
Caliper is attached to the new Galfer line.
Brake pads are also out.

I wonder what is the correct and least problematic way to refill from scratch.

July 12th, 2020, 08:06 PM	#3
arthury ninjette.org member Name: Arthur Location: Sammamish , WA Join Date: Jun 2020 Motorcycle(s): 2008 Ninja EX250J; 2005 CBR1000RR Posts: 108	Since I was planning to replace the brake hose with the new Galfer Stainless ones, I thought this is a perfect time to do so. Old hose was removed. The Galfer one is in place, loosely bolted on both ends. Master Cylinder is completely empty. Caliper is attached to the new Galfer line. Brake pads are also out. I wonder what is the correct and least problematic way to refill from scratch. Last futzed with by arthury; July 12th, 2020 at 10:10 PM.