ninjette.org - View Single Post - 08-12 Ninja Homemade rear spools

DmbShn41 · June 7th, 2015, 10:37 AM

Still paying it forward for all the knowledge I got from here....Designed and made a new pair of rear spools for my bike to use with rear stand. Hence, I no longer need the ones that I made last year out of UHMW plastic. These are crude, come with stainless hardware, and work. They're white, approx 1.625" long, 1.5" diameter, so clearance may be an issue. They bolted up on mine no problem, hardware was long enough to pinch them against the swing arm.

I'm thinking some one could use these, whether someone new just starting out or a racer that isn't concerned about looks, and more about functionality. Free to a good home for the cost of shipping, $5-8 at most, they're light. PM me.

June 7th, 2015, 10:37 AM	#1
DmbShn41 Wannabe Reborn Name: Unregistered Location: Cincy Ohio Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302	08-12 Ninja Homemade rear spools Still paying it forward for all the knowledge I got from here....Designed and made a new pair of rear spools for my bike to use with rear stand. Hence, I no longer need the ones that I made last year out of UHMW plastic. These are crude, come with stainless hardware, and work. They're white, approx 1.625" long, 1.5" diameter, so clearance may be an issue. They bolted up on mine no problem, hardware was long enough to pinch them against the swing arm. I'm thinking some one could use these, whether someone new just starting out or a racer that isn't concerned about looks, and more about functionality. Free to a good home for the cost of shipping, $5-8 at most, they're light. PM me. __________________________________________________ " If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. "
	1 out of 1 members found this post helpful.