Thread: PROJECT X
View Single Post
Old March 21st, 2016, 10:17 PM   #98
Somchai
Freedom for Germany
 
Location: This World
Join Date: May 2011

Motorcycle(s): Ninja 250R-FI

Posts: A lot.
Eric and for the last 0.4 hp (maybe it's only 0.3 - idk, but it is) you'll need this:
"HKS MGV
Engines-slip improver

Surfacing at all highly stressed friction surfaces
HKS MGV reduces mechanical engine noise, gear box singing and wear on internal combustion engines, transmissions, wet clutches and primary drives of motorcycles.

HKS MGV is suitable for all internal combustion engines, transmissions and wet clutches and primary drives of motorcycles and reduces mechanical engine noise, gear singing and wear.
For some types of motorcycles an uncomfortable gear box singing / whistling of the primary drive is noticeable. According to the survey this singing / whistling interferes motorcyclists. Now we have completed the long ongoing development of HKS MGV.

Besides the many advantages of HKS MGV as friction reduction, delay of pitting and the like. We succeeded the significant reduction in noise (whistling / singing) from the gear box and primary drive. Even the finely machined highly stressed contact surfaces HKS MGV causes smoothing, by HKS MGV is pressed into the micro fine pores of the surface by the pressure load and intercalates there.
Clutchs are not affected by MGV. There is no appreciable wing loading at the friction points."
Attached Images
File Type: jpg HKS-MGV.jpg (201.9 KB, 1 views)
Somchai is offline   Reply With Quote