September 26th, 2022, 12:41 PM
|
#35
|
|
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009
Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F
Posts: A lot.
|
Quote:
Originally Posted by Zpatton
Danny thanks. It wasn’t exactly easy but I got it into about as straight as I think it’ll go. So far so good.
Now, progress is being made. So much in fact that I went ahead and got things put together enough to try and do a test start!
https://photos.app.goo.gl/HUvsrYHkhpaBPhzb7
SO CLOSE!!!!
Any ideas?
Friend of mine says to just go ahead and replace the ignition coils as I tried seeing if an old plug would arc during start but wasn’t getting anything.
I’m finding this bike is more Frankenstein than I originally believed to be so. There’s so many mismatched nuts and bolts I dunno what the hell is going on. Having to order lots of correct replacements simply because I do NOT trust what’s on there. |
Sounds like it’s trying to work! Is the petcock set to Prime? Is there fresh gas?
|
|
|