Quote:
Originally Posted by Ceeloo Yello
You sure you are not putting it onto reserve instead of off?
|
Yep, triple checked that
On further inspection, it looks like the wire that connects the float valve to the float wasn't right. It bent out too far around the valve which didn't let the rubber seal on the opening. I just took some pliers and bent them back and now I'm getting proper sealing (I was checking with compressed air. Before it couldn't hold 5psi even while I was pushing the valves down, now it can hold 20psi easily on its own).
I'll throw my carbs back on my bike tomorrow and post an update if anything interesting happens.