ninjette.org - View Single Post

dodgerdad · October 24th, 2018, 04:10 PM

I went through the carbs and followed the directions on the wiki to the letter. It did appear that one of the pilot circuit ports may have been clogged.

Fired up the bike and it it idles without the choke now. The RPM seems a bit low so when I adjust the idle knob it raises it but is very slow to come down when you rev it.

I assume the air mixture needs to be adjusted a little (currently set at 2.5 turns out) so that'll be my next step unless anyone here suggests otherwise.

Thanks for your help so far!

October 24th, 2018, 04:10 PM	#12
dodgerdad ninjette.org guru Name: Hector Location: SoCal Join Date: Sep 2018 Motorcycle(s): 2007 Ninja 250 Posts: 272	Update I went through the carbs and followed the directions on the wiki to the letter. It did appear that one of the pilot circuit ports may have been clogged. Fired up the bike and it it idles without the choke now. The RPM seems a bit low so when I adjust the idle knob it raises it but is very slow to come down when you rev it. I assume the air mixture needs to be adjusted a little (currently set at 2.5 turns out) so that'll be my next step unless anyone here suggests otherwise. Thanks for your help so far! __________________________________________________ When you see me, it's already too late.