Thread: 06 250 heeeelp!
View Single Post
Old April 8th, 2017, 07:38 AM   #5
Jwigs78
ninjette.org newbie
 
Name: Jason
Location: Oceanside, ca.
Join Date: Apr 2017

Motorcycle(s): Ninja 250 Buell XB12STT

Posts: 3
Hey thanks for the info! I'll start by answering some of your suggestions. So...yes I have replaced all jets mixture screws and float needles. I have also junked the old fuel tank because it was horribly rusted. I found a guy parting out a bike on Craigslist and picked up his tank. I did realize after reading a few other threads that when I put the bike back together it was low on gas so I turned the petcock to reserve and most likely ran some sediment into the line and thus into the carbs. I picked up a small filter for the fuel line yesterday and today will be tearing her apart AGAIN to clean out the carbs and see if she runs afterwards. I appreciate all the input and will let you guys know how it goes.

THANKS AGAIN
Jwigs
Jwigs78 is offline   Reply With Quote


1 out of 1 members found this post helpful.