October 10th, 2015, 01:44 PM
|
#21
|
ninjette.org member
Name: Gumbow
Location: St. Paul MN
Join Date: Sep 2015
Motorcycle(s): 2004 Ninja 250
Posts: 60
|
Quote:
Originally Posted by Ghostt
Perhaps this will help, and yes you need to add the resistor to the gray wire that goes to the ignition module.
Kawasaki did this to prevent HOT WIRING the bike, until you add the resistor, it won't start, and it's probably your problem, once fixed the ignition module will work again.
Next stop for you is Radio Shack.
|
The resister is only on the gray line shown on the diagram something not looking right for me.
|
|
|