Thanks for the quick reply!
I think im going to go out and grab that wrench, that looks pretty sweet.
Quote:
Originally Posted by dino74
-What was the measuement for the nut from the bottom, or does it matter?
The position is determined by the adjustment of the compression/rebound needles. You want each to have 3 full turns. If you have more than 3 then the cap needs to move down and vice versa. Make sure to back out the needles before you adjust the cap.
[/COLOR]
|
Im still a bit confused by this (sorry first time doing full blown cartritges).
What exactly is the setting for the nut (Red arrow with black inside is pointing at) and how many rings of threads from the bottom. Three full turn from when the nut is all the way at the bottom?