ninjette.org - View Single Post

Bob KellyIII · January 30th, 2023, 05:42 PM

Well, after getting the Carbs sent to Ducattiman and getting them back already I finally got the valve lash set to where I am happy with it and am putting it back together.
....it's going extreamily slow as I can only stay out there in that cold for about 30 to 45 minutes... but I am slowly getting it back together... it looks like the TRX push button rivits
(plastic rivit junk) will fit to hold the inner fairing on so that problem should be solved.
.... when I get to the point where I can try running it again I will do so and probably take it down the block and back before I put the fairings back on.
I don't anticipate any problems but it never hurts to be sure FIRST ! LOL
...
Bob......

January 30th, 2023, 05:42 PM	#8
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	Well, after getting the Carbs sent to Ducattiman and getting them back already I finally got the valve lash set to where I am happy with it and am putting it back together. ....it's going extreamily slow as I can only stay out there in that cold for about 30 to 45 minutes... but I am slowly getting it back together... it looks like the TRX push button rivits (plastic rivit junk) will fit to hold the inner fairing on so that problem should be solved. .... when I get to the point where I can try running it again I will do so and probably take it down the block and back before I put the fairings back on. I don't anticipate any problems but it never hurts to be sure FIRST ! LOL ... Bob...... __________________________________________________ Its too late when you've gone too far !