Quote:
Originally Posted by M-Oorb
Went to go take off the front sprocket today...and I dont have the right size ratchet to take the nut off.
|
I thought VeX was going to correct you on this.
We all know that you meant to say "I dont have the right size SOCKET to take the nut off." Am I not correct? Most likely you shouldn't be using a ratchet, anyway, as you might strip the ratchet mechanism, depending on how tight the bolt/nut is. Get yourself a nice 18"-24" 1/2" drive pull handle and the appropriate 1/2" drive metric sockets, unless of course, you have access to a compressor and air tools!
Good Luck!