ninjette.org - View Single Post - What size ratchet to take off front sprocket?

kkim · January 12th, 2009, 12:11 PM

Try putting a long piece of pipe over the end of the breaker bar and stand on the pipe. Try using a 2x4 through the swingarm and wheel. PVC pipe may be too soft.

Are you positive the locking washer is completely bent flat out of the way?

January 12th, 2009, 12:11 PM	#8
kkim Join Date: Nov 2008 Posts: Too much.	Try putting a long piece of pipe over the end of the breaker bar and stand on the pipe. Try using a 2x4 through the swingarm and wheel. PVC pipe may be too soft. Are you positive the locking washer is completely bent flat out of the way?