ninjette.org - View Single Post - Help with a 1986 Ninja 250 that will not rev up

September 11th, 2021, 02:35 PM

Got it to run and It will free rev past 5000 rpm but slow to get there. Once it gets to 5,000 RPM it hesitates before going up any higher. should i shim the needles up one and see if that helps?

Tom

September 11th, 2021, 02:35 PM	#44
tomsninja2020 Guest Posts: n/a	Got it to run and It will free rev past 5000 rpm but slow to get there. Once it gets to 5,000 RPM it hesitates before going up any higher. should i shim the needles up one and see if that helps? Tom