ninjette.org - View Single Post - Help with a 1986 Ninja 250 that will not rev up

September 18th, 2021, 01:10 PM

Just a quick update:

Got the bike on the road. Ran fine, Idled like really really bad had to keep bliping throttle to keep it going when at a stop sign. Sometimes the idle hangs high and some times low and the oil pressure light keeps coming on at anything less then 2,000 RPM. Please help. I just cannot figure out the idle issues. Mixture screws are out about 2 turns each. I hear clicking coming from the valve cover and popping sounds when i let off the throttle that seem to come from exhaust header at the cylinder head.

Please help

Thanks
Tom

September 18th, 2021, 01:10 PM	#54
tomsninja2020 Guest Posts: n/a	Just a quick update: Got the bike on the road. Ran fine, Idled like really really bad had to keep bliping throttle to keep it going when at a stop sign. Sometimes the idle hangs high and some times low and the oil pressure light keeps coming on at anything less then 2,000 RPM. Please help. I just cannot figure out the idle issues. Mixture screws are out about 2 turns each. I hear clicking coming from the valve cover and popping sounds when i let off the throttle that seem to come from exhaust header at the cylinder head. Please help Thanks Tom