ninjette.org - View Single Post - Versys 300 suspension on pre-gen 250r

D_Fresh · February 17th, 2021, 04:16 PM

Thank you for the advice. I put in a ninja 300 rear shock and it actually lifted the rear end a little bit (the rear tire touches when it's on the center stand. I've been cross referencing the head tube bearings and from what I can tell, if you can just swap 08-12 forks onto a pregen then the versys x300 forks should be a direct swap also. Trying to find a x300 front end for less than $500 has been the challenging part. Have you ever tried to put your ninja wheels on your versys?

February 17th, 2021, 04:16 PM	#7
D_Fresh ninjette.org member Name: Doug Location: Lincolnton, NC Join Date: May 2020 Motorcycle(s): 88 Kawasaki Ninja 250, 05 Kawasaki Z750S Posts: 10	Thank you for the advice. I put in a ninja 300 rear shock and it actually lifted the rear end a little bit (the rear tire touches when it's on the center stand. I've been cross referencing the head tube bearings and from what I can tell, if you can just swap 08-12 forks onto a pregen then the versys x300 forks should be a direct swap also. Trying to find a x300 front end for less than $500 has been the challenging part. Have you ever tried to put your ninja wheels on your versys?