[59096]

Hi All,

I have decided to replace the clunky clutch on my 1990 GPX250 with a complete clutch and pushrod from a 2011 model that I got from eBay. I have four questions which You May be able to help me with;

1. Does the nut holding the clutch centre loosen anticlockwise or clockwise.
2. What’s the cheapest way to hold the basket while removing the nut?
3. What is the tightening torque PSI for this clutch basket centre nut?
4. Any tricks or tips?

I will be grateful for all advice. Would rather not just barge in and break something.

Regards and thanks
Garry