Quote:
Originally Posted by thunderkat59
Hey Danno!
Did you use stock chain on the 16 toofer
New gen sprocket cover is strictly bolt on?
As always thank you for the wisdom
|
You're most welcome!
Pre-gen sprocket cover rubbed on chain with 16t sprocket. Yes, new-gen cover is bolt-on and has more room inside. Pre-gen cover won't fit on new-gen though.
I did this at same time as new-gen swing-arm, brake & 17" rear-wheel conversion. Ended up sliding rear-axle forward about 7mm with same 106-link chain. So if you've got 7mm of room in swing-arm slot, it should work with original chain.
The difference is change in radius of sprockets. Going to 15/44t would slide rear-wheel back about 1mm.