ninjette.org - View Single Post

Bob KellyIII · June 2nd, 2022, 12:04 AM

I didn't have enough energy to take the bike out for a ride today but I did LOOK at it ! LOL
.... and I noticed something I didn't like... there are 2 screw places in the rear under fender for the bike, these protrude down a good 3/4" well at that picitular place it put them about 1/2" away from the tire... ! so I cranked down the pre load at least another 1/2" and I'll give it a try from there so it doesn't look like 29.5" seat height will work at all
we'll see what it does at 29" or what ever it is right now... it didn't seem to change much when setting on it and the bike is still too vertical when on the side stand normially, so I moved it back off the patio so I could get more lean on it.
....
I gott'a do town running tomorrow in the early afternoon but I should have time after that to take her for a short ride and see if that inner fender is going to Rub.....
....
Later !
Bob......

June 2nd, 2022, 12:04 AM	#59
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	I didn't have enough energy to take the bike out for a ride today but I did LOOK at it ! LOL .... and I noticed something I didn't like... there are 2 screw places in the rear under fender for the bike, these protrude down a good 3/4" well at that picitular place it put them about 1/2" away from the tire... ! so I cranked down the pre load at least another 1/2" and I'll give it a try from there so it doesn't look like 29.5" seat height will work at all we'll see what it does at 29" or what ever it is right now... it didn't seem to change much when setting on it and the bike is still too vertical when on the side stand normially, so I moved it back off the patio so I could get more lean on it. .... I gott'a do town running tomorrow in the early afternoon but I should have time after that to take her for a short ride and see if that inner fender is going to Rub..... .... Later ! Bob...... __________________________________________________ Its too late when you've gone too far !