ninjette.org - View Single Post - Fork height after tapered roller steering bearings?

DannoXYZ · June 11th, 2022, 01:49 PM

I have read reports of people having higher front-ends after bearing replacement. I suspect that may be due to really worn-out or really loose bearings beforehand. This may cause some front-end drop compared to stock. In which case, new bearings would raise front end. But only back up to stock levels.

June 11th, 2022, 01:49 PM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	I have read reports of people having higher front-ends after bearing replacement. I suspect that may be due to really worn-out or really loose bearings beforehand. This may cause some front-end drop compared to stock. In which case, new bearings would raise front end. But only back up to stock levels.
	1 out of 1 members found this post helpful.