ninjette.org - View Single Post - pushing bike in 2nd clutch out seized engine?

Seirra117th · April 30th, 2019, 10:52 PM

here is a post of mine sorting out some electics with the starter and ignition diodes.
https://www.ninjette.org/forums/showthread.php?t=333622
One of the starter diodes is faulty with the same resistance both directions.

i had also accidentally swapped then over after testing, pushed the start button and for a split second i thought i could hear the starter moter turn then starter relay started clicking.
2nd start up even less starter turn then clicking
3rd startup as expected no stater turn but still clicking
So that should now be pointing me back to the 11.5v battery issue

April 30th, 2019, 10:52 PM	#9
Seirra117th ninjette.org member Name: Daniel Location: N.S.W. Australia Join Date: Apr 2019 Motorcycle(s): Ninja 250r 2008 Posts: 54	here is a post of mine sorting out some electics with the starter and ignition diodes. https://www.ninjette.org/forums/showthread.php?t=333622 One of the starter diodes is faulty with the same resistance both directions. i had also accidentally swapped then over after testing, pushed the start button and for a split second i thought i could hear the starter moter turn then starter relay started clicking. 2nd start up even less starter turn then clicking 3rd startup as expected no stater turn but still clicking So that should now be pointing me back to the 11.5v battery issue