Quote:
Originally Posted by DannoXYZ
Those rubber seals on sides can be carefully pried off. Then bearing can be flushed out and cleaned. Repack with Red Line CV-2 synthetic grease. Then push cover back on and you don't have to touch it for another 10-15 years!
|
I did not know they are serviceable. I will try to pry them with a pick.
Thanks for the advice!
Is kerosene good for flushing ? I remember my granddad used it for this kind of tasks.
BTW I posted the diameters you were asking about in that sticky thread.
Its 15mm for the axle.