Quote:
Originally Posted by kamikaze
got it with some help. gf's dad was coming over for movie so I told him he had to help. got the front one with my new $9 22mm socket ( ) to find out that the rear is bigger. i'm assuming it's 23mm. anyway, it wasn't nearly as tight as the rear, so I managed to get it with an adjustable wrench, but I'll still need a socket to torque it back up. not a big deal, I can pick up the other one tomorrow.
I can see how it's a pain to put that axle back in, general consensus is that it's fine to put back in from the right side with the nut on the left?
|
Rear axle nut is actually 24mm. Yes, it's fine to reverse the rear axle (don't see why front would be a problem either).... I only started doing this on the rear recently, but it would have made life a little easier being that the rear brake mount just floats on there.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen)
Honda CBR500r (2014) - FOR SALE
Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned
|