ninjette.org - View Single Post - 300 seems to be running at 50% power. Severe idling problems. Turns off

DannoXYZ · December 14th, 2019, 04:17 PM

Numbers are little low. Looks like your procedure is correct. A lot of people make mistake of not having throttle WOT. Yes, cold engine typically does not seal as well, but is usually down only -20-25%. Here’s additional test data you can get:

2. Repeat test with warmed up engine
3. Repeat with warmed up engine with ~1cc engine-oil squirted into cylinders through spark-plug hole.

These numbers combined with your original test will help narrow down areas to inspect more closely. Might want to check cam-chain tension and cam-timing.

December 14th, 2019, 04:17 PM	#13
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Numbers are little low. Looks like your procedure is correct. A lot of people make mistake of not having throttle WOT. Yes, cold engine typically does not seal as well, but is usually down only -20-25%. Here’s additional test data you can get: 2. Repeat test with warmed up engine 3. Repeat with warmed up engine with ~1cc engine-oil squirted into cylinders through spark-plug hole. These numbers combined with your original test will help narrow down areas to inspect more closely. Might want to check cam-chain tension and cam-timing.