ninjette.org - View Single Post

dozu · February 11th, 2019, 07:54 PM

hi - I took the springs and the rods out, drilled extra holes on the rods for the gold valve emulator, but when i dropped the rods in and thread in the allen bolt, the fork is now stuck in the collapsed position and will not extend at all!

what's going on?

thx.

February 11th, 2019, 07:54 PM	#1
dozu ninjette.org newbie Name: Don Location: PA Join Date: Aug 2013 Motorcycle(s): 250 Posts: 7	fork spring change hi - I took the springs and the rods out, drilled extra holes on the rods for the gold valve emulator, but when i dropped the rods in and thread in the allen bolt, the fork is now stuck in the collapsed position and will not extend at all! what's going on? thx.