ninjette.org - View Single Post

GeorgeRYoung · September 30th, 2012, 07:14 PM

You can buy a replacement valve from an auto supply place for a couple of bucks.

If you break the bead on one side of the tire, you can probably remove the old valve and insert the new one.

You put on a steel valve cap and pull it through, soapy water helps.

Then pump the tire up until the bead seats again, soapy water helps.

No need to re-balance.

September 30th, 2012, 07:14 PM	#2
GeorgeRYoung ninjette.org member Name: George Location: Ottawa, Canada Join Date: Jun 2011 Motorcycle(s): EX250, C10 Concours Posts: 109	valve replacement You can buy a replacement valve from an auto supply place for a couple of bucks. If you break the bead on one side of the tire, you can probably remove the old valve and insert the new one. You put on a steel valve cap and pull it through, soapy water helps. Then pump the tire up until the bead seats again, soapy water helps. No need to re-balance.