ninjette.org - View Single Post

cookiebug79 · June 18th, 2013, 07:34 AM

To remove push the center in. I used an allen key for no good reason other than it was hard:

Then pry it out with a flat head screw driver if it's stuck:

To re-install, pull the top part out and snap it all back together:

June 18th, 2013, 07:34 AM	#15
cookiebug79 n00b with the b00bs Name: Jen Location: Southern California Join Date: Jan 2013 Motorcycle(s): 2007 EX250, 2008 EX250, 2001 ZR-7S, 2010 ZX-6R Posts: 470	To remove push the center in. I used an allen key for no good reason other than it was hard: Then pry it out with a flat head screw driver if it's stuck: To re-install, pull the top part out and snap it all back together: