ninjette.org - View Single Post - Bottom triple clamp sits too high in frame.

DannoXYZ · May 4th, 2018, 05:24 PM

While the outer races are different OD, both the inner races have 30mm ID and both bearings have same ID. It can be assembled 4 different ways.

May 4th, 2018, 05:24 PM	#6
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	While the outer races are different OD, both the inner races have 30mm ID and both bearings have same ID. It can be assembled 4 different ways.