ninjette.org - View Single Post - Bottom triple clamp sits too high in frame.

Zombarian · May 24th, 2018, 04:10 PM

So it seems I had mixed up the bearings and their races my first go at it, so I removed both races and tried installing them (again) according to the ninja250.org wiki faq page on it (https://faq.ninja250.org/wiki/Steeri...ng_replacement) but now Im running into the issue that I cant get the 3504 bearing race into the top at all and the 3503 is loose enough to fall out from gravity, this cant be right can it?

May 24th, 2018, 04:10 PM	#9
Zombarian ninjette.org member Name: James Location: urth Join Date: Mar 2014 Motorcycle(s): 04 ninja 250, 2010 klx 250sf, 86 gsxr 750 Posts: 21	So it seems I had mixed up the bearings and their races my first go at it, so I removed both races and tried installing them (again) according to the ninja250.org wiki faq page on it (https://faq.ninja250.org/wiki/Steeri...ng_replacement) but now Im running into the issue that I cant get the 3504 bearing race into the top at all and the 3503 is loose enough to fall out from gravity, this cant be right can it?